Front-End Hydraulic Telescopic Cylinder for Cargo Dump Truck
| Model |
|
|
Rated Press(Mpa) |
|
Lift capacity(T) |
|
Weight(KG) |
Oil Port |
Oil Volume(L) |
| FE 3TG-F091*3205-1424 |
|
|
20 |
|
11-18 |
|
92 |
1"SAE |
16 |
| FE 3TG-F110*3205-1399 |
|
|
20 |
|
21-46 |
|
98 |
1"SAE |
24 |
| FE 3TG-F110*3700-1529 |
|
|
20 |
|
20-37 |
|
109 |
1"SAE |
28 |
| FE 3TG-F129*3460-1449 |
|
|
20 |
|
33-59 |
|
129 |
1"SAE |
37 |
| FE 3TG-F129*3880-1609 |
|
|
20 |
|
33-59 |
|
142 |
1"SAE |
42 |
| FE 3TG-F149*3880-1644 |
|
|
20 |
|
47-68 |
|
168 |
1"SAE |
56 |
| FE 4TG-F149*4620-1484 |
|
|
20 |
|
35-70 |
|
171 |
1"SAE |
59 |
| FE 4TG-F149*4940-1529 |
|
|
20 |
|
34-66 |
|
179 |
1"SAE |
63 |
| FE 4TG-F169*4620-1479 |
|
|
20 |
|
51-83 |
|
206 |
1"SAE |
78 |
| FE 4TG-F169*5180-1604 |
|
|
20 |
|
50-83 |
|
227 |
1"SAE |
88 |
| FE 5TG-F169*5355-1394 |
|
|
20 |
|
35-66 |
|
212 |
1"SAE |
80 |
| FE 5TG-F169*5780-1559 |
|
|
20 |
|
34-60 |
|
224 |
1"SAE |
87 |
| FE 5TG-F169*6180-1559 |
|
|
20 |
|
34-58 |
|
236 |
1"SAE |
93 |
| FE 5TG-F169*6480-1604 |
|
|
20 |
|
34-56 |
|
247 |
1"SAE |
97 |
| FE 5TG-F191*6180-1527 |
|
|
20 |
|
49-84 |
|
281 |
1"SAE |
122 |
| FE 5TG-F214*7130-1722 |
|
|
20 |
|
60-84 |
|
380 |
1"SAE |
188 |
| Cylinder Tube O.D. |
131mm-242mm |
| Operating Pressure |
16Mpa-20Mpa |
| Numbers of Stage |
3, 4, 5, 6 |
| Largest Moving Stage Diameter |
110mm-214mm |
| Stroke |
2900mm-9030mm |
| Closed Length |
1320mm-2177mm |
| Extended Length |
4220mm-11207mm |
| Plunger Mount Thickness |
42mm-52mm |
| Warranty Period |
14 months after date of production |
| Piston rod head radius |
53-62mm |
| Oil Port |
G1/1''SAE |
| Cardinal Axi |
60mm-65mm |
| Port Size |
50mm-60mm |
Product Advantages:
1 more than 22 years manufacture experience
2 Our own factory
3 ISO9001-2008
4 Competitive price and high quality
4 Competitive price and high quality
5 Based on your drawing or requirement
6 rigid matching control and proper seals
7 Easy install and easy maintain
Product Process:
1.Raw materials entering the factory, 27SiMn, 40CrMo, ST52, 45# steel tubes or bars for choice
2.Do the pre-treatment including pickling, phosphating and saponification, and then cold-draw the seamless steel tubes.
3.Put the steel tubes into the tempering furnace to do the stress relief annealing in convenience of the subsequent the processing.
4.Multi-roll straightening machine, with 10 straightening points, achieves the automatic rolling straight improving the efficiency greatly
5.Heat treatment to obtain work pieces with different properties by changing their internal microstructure or surface chemical composition.
6.Cylindrical degree can be controlled within 0.03mm and the surface roughness is up to 0.4 by honing with range:φ40mm-φ450mm and longest length: 12000mm
7.Machining processes to obtain high precision parts with complex shapes strictly according to the detailed drawings.
8.Electroplating production process fulfills the functional and ornamental requirements for coating work pieces of different dimensions according to specific application requirements.
9.Cleaning all the parts by automatic cleaning machine in the special solution and under special temperature control effectively.
10.All the parts are assembled into complete cylinders according to the strict assembly instructions by skillful workers in dust-free workshop.
11.Do proof pressure and performance tests to check whether the cylinders can operate smoothly and stably under the specified pressure with no leakage and deformation.
12.Do the painting including high quality primer and topcoat to obtain beautiful appearance and protect the cylinders against the anticorrosion.
13.Wooden pallet or boxes packing with plastic films wrapped on the surface, suitable for long-time sea transport.
Quality Control:
>All specification is designed by professional engineer.
>All material is high quality-Seal kits were purchased from USA, Japan, UK and Sweden.
>All material is processed by skilled workers and advanced CNC lathe
>All cylinders are 100% tested before package to ensure every cylinder is qualified for its purpose
>Package is air cushion film for each cylinder and steel case for all cylinders to ensure goods can arrive at customer safely
>14 months warranty and long time track service is offered to solve any problems you meet after sale.
Guarantee and after sale service:
>7 x 24 hours technical support through email
>Goods will be delivered safely on time
>14 months guarantee after destination port arrival
>Life long time track service
After-sales service
Warranty period:
Wantong Hydraulic warrants all cylinders to be free from any defects in material or workmanship under normal use and service for a period of 14 months
Exclusion clause:
This warranty does not cover & WANTONG shall have no responsibility for:
1.Troubleshooting, diagnostic, removal, or reinstallation labor charges;
2.Freight charges for either defective parts or new or repaired parts unless prior written approvalis obtained from WANTONG;
3.Claims for loss of time, inconvenience, loss of use, profits or other consequential damages
4.Conditions from, alteration, accident, misuse, neglect, fire, theft, loss, intentional damage, direct,indirect, consequential, incidental, weather related, or any other type of damage resulting fromthe use of the product;
5.Corrosion unless the material is found to be out of specification;
6.Failure due to contamination introduced to the cylinder;
7.Paint unless out of specification;
diagnostic:
(1)After customers giving a feedback on product quality problems through the network or telephone, wantong companies will reply within 24 hours
(2)We make every effort to make a diagnosis within 3-5 days or communicate with customers to do a detailed program.
(3)Wantong technology and quality departments have the responsibility to confirm the customer's question, for troubleshooting.
While customers would better provide as much as possible the product use of operating conditions, product damage photos, video, etc., to accurately determine the product problem and prevent similar problems in the future.
Accessories occur problems at warranty period:
(1) If the customer is anxious, then we can provide free of charge within 5-20 working days [NOTE: According to the parts model, whether have inventory or purchase cycle], air freight should be beard by the customer.
(2) If the customer is not anxious, it is recommended that sending the part to him in the next batch of orders, free of charge.
Hydraulic cylinder problems occur at warranty period:
(1) New cylinder replace;
(2) price discount in the next order;
(3) the "repair fee" pay: repair fee required to within a reasonable range: the cost of wantong repair problem hydraulic cylinder < repair fee < the cost of production of a new hydraulic cylinder;
(4) for strategic customers, one to one special treatment.
Our product
Our Slogan:
"Pursue zero defect of our products, and realize zero customers' complains"
Company introduction:
Founded in 1995, with registration capital of 60 million RMB, Shandong Wantong Hydraulic Co., Ltd is specialized in hydraulic products design,R&D and manufacturing.
We mainly produce Hydraulic Cylinder including Vehicle Hydraulic Cylinder, Coal Mining Hydraulic Cylinder, Engineering Hydraulic Cylinder ,Oil field cylinder and Ocean Engineering Hydraulic Cylinder.Also we can design and manufacture various special purpose hydraulic cylinders such as agriculture hydraulic cylinder,industry hydraulic cylinder, 6 DOF platform, machine tools, etc.
We have more than 120 kinds of hydraulic cylinder , our annual capacity is 200 thousand sets of cylinders which makes our company an important production base for hydraulic cylinders.
Our company covers an area of 180 thousand square meters (193 thousand square feet),and has more than 500 employees.We have solid and advanced production equipments including cold drawing line, heat treatment line, surface treatment line, testing machines and various CNC machines, totally 700 sets of machines.
All production steps are finished in same factory which guarantees good quality and short lead time. All the products have passed validation of ISO/TS16949, CCRI, CCS, and DNV AND ABS,API,etc.
>Professional manufacturer& supplier of Hydraulic Cylinders for more than 22 years;
>Hydraulic Cylinders Certification ISO9001:2008, SGS, TS16949, RoHS, CNAS Certification;
>Experience in export North America, Australia, Asia, Middle East, Africa;
>Hydraulic Cylinders can be Make according to client's requirements;
>The Hydraulic Cylinders can be used for Dump Truck, Tipper Truck, Trailer, Agricultural Machinery, Engineering Machinery, Garbage Truck, Landing Platform etc;
>We are the supplier of Sinotruk, CNHTC, CIMC, Wuzheng, Beiben Truck, Baic Group, FOTON, HOWO, JAC, Sichuan Hyundai, Dayun, Shanxi Automobile, most of famous truck manufacturing and refitting company use our telescopic cylinder as first choice
Company advantage:
1 We have an excellent R&D team, they can use advanced design software to make our products make them more precise by accurate measurement
2 To ensure every cylinder qualified, we have built our large size CNC hydraulic testing platform
3 Our quality team will test and record each quality and function requirement to guarantee the products we supply to our customers are the best.
4 22 years experience in manufacture hydarulic cylinder
5 Passed ISO/TS16949
6 Factory direct sale,reasonable get high quality product.
Our customer
Ceritificated&Trade Fair
Packing:
FAQ:
Q1:What's the brand name of your products ?
A:Generally,we use our own brand "WTJX",OEM is also available as required.
Q2:Hydraulic cylinder internal leakage?
A: There are 3 main reasons causing internal leakage :Overload,polishing is not well controlled,bad seal kits.As is known to all,vehicles in China are often overload,our products all designed to bear the overload power.We have numerical control machine to assure the polish processing .And we use the imported seals to meet customers' demands.
Q3:Does your piston rod get ruptured easily?
A: Hard chrome plating quenched and tempered 45# steel for piston rod to assure sufficient hardness and toughness.
4:Is your design reasonable? What about your product safe coefficient?
A:We have R&D team with abundant design experience. We also established production, education, and research cooperation with universities . Rest assured.
Q5:What about the quality feedback of your products?
A: Guarantee the quality from the raw material. We have cold drawing production line and nickel-chrome electroplating production line, so we can produce cold-drawing pipe and hard-chrome pipe used for hydraulic cylinder!!! WE HAVE NEVER RECEIVED EVEN ONCE QUALITY COMPLAINT FOR MANY YEARS OF INTERNATIONAL TRADE.
Q6:Is the sample free?
A:Yes.In our acceptable range, we can offer a sample by charging freight. And we will return the fee after you place bulk order.
Q7:How about the delivery time?
A: Over 700 sets advanced equipments to meet customer's large demand in short delivery time.Generally ,it's 7-15 days.
Q8:What 's the after-service?
A:If the quality can't meet your requirement ,we will pay all your lost and offer technical support to solve your problem!!!
Q9:How can I contact with you ?
Audited Supplier 
){kind=link}
){kind=link}